MVL-20
MVL-20 Momentum Malaysia, Johor, Johor Bahru (JB), Selangor, Penang Supply Supplier Suppliers | IPM TECHNOLOGY SDN BHD
  MODEL UNIT MVL-20
Capacity Max. Swing Diameter mm (Inch) Ø2,500 (98.42)
Max. Turning Diameter mm (Inch) Ø2,500 (98.42)
Distance From Bite Holder End To Table Surface mm (Inch) 0 ̴ 1,825 (0 ̴ 7185)
Max. Turning Height mm (Inch) 1,800 (70.86)
Max. Workplace Weight kg 15,000
Table Table Diameter (Manual Chuck) mm (Inch) Ø 2,000 (78.74)
Range Of Table Speed (Low) rpm 13  ̴ 50
Range Of Table Speed (High) rpm 51 ̴ 200
Gear Speed steps 2
Max. Of Table Torque N.m 55,800
ATC ATC (Automatic Tool Changer) set 1
Number Of Tool Stations Random 12
Tool Type   T-Puller
Tool Size mm (Inch) 25 / 32 / 40 (1” / 1.25” /1.5”)
Cross Section Of Ram mm (Inch) 254 x 254 (10 x 10)
Travel Horizontal Travel (X-Axis) mm (Inch) -1,300+1,510(-51.18+59.44),ref point
Vertical Travel (Z-Axis) mm (Inch) 1,250 (49.20)
Cross Rail Travel mm (Inch) 1,120 (44.08), 4step (5 positions)
Feed Rates Rapid Rate (X-Axis) m/min 10
Rapid Rate (Z-Axis) m/min 10
Cutting Feed Rate mm/rev 0.001 ~ 500
Feed Overide % 0 ̴ 150
Motor Table Main Motor kW (HP) ᾳ60HVi, 60 /75 (80.4/100.5)
Feed Servo Motor (X Axis) kW (HP) ᾳ30i 7 (9.4)
Feed Servo Motor (Z Axis) kW (HP) ᾳ30Bi 7 (9.4)
Milling Spindle Motor kW (HP) -
Cf Axis Motor kW (HP) -
General Machine Height mm 6,715
Floor Space (L x W) mm 8,150 x 6,130
Machine Weight kgs 45,000
•Specification is subject to change without further notice.
 

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version