Horizontal Machining Center 'HU'series
●The load to the column sliding section is reduced by air support for smooth high-speed feed despite the sliding method.
●Highly rigid Y-shaped integrated three-point support bed is adopted.
●Ball screws of all axes are placed in the center of the sliding surface to minimize the position difference. (In the case of standardi spindle of HU63A/HU80A)
●Y axis ball screw is adopted twin drive, minimized position difference. (In the case of HPX63)
OP=Option
HU63A
●Box guide ways realize long term high-precision and high rigidity. Heat treated box guide ways are attached to the surface which has high straightness and perpendicularity by scraping. ●The load to the column sliding section is reduced by air support for smooth high-speed feed despite the sliding method.
●Highly rigid Y-shaped integrated three-point support bed is adopted.
●Ball screws of all axes are placed in the center of the sliding surface to minimize the position difference. (In the case of standardi spindle of HU63A/HU80A)
●Y axis ball screw is adopted twin drive, minimized position difference. (In the case of HPX63)
Specification
Item | Unit | HU63A | |
Stroke | X-axis | mm | 900 |
Y-axis | mm | 800 | |
Z-axis | mm | 800 | |
Table | Palette size | mm | 630×630 |
Maximum loading weight | kg | 1,200 | |
Spindle | Taper | ISO 7/24 Taper No.50 | |
Spindle rotation speed | min-1 | 15 ~ 6,000 (OP:12,000/20,000) |
|
Feed rate | Rapid feed rate | m/min | 24 |
Cutting feed rate(max.) | m/min | 10 | |
APC | 2APC Front side turn type | ||
ATC | Number of tools to be strored | pcs. | 60 |
Machine weight | Kg | About 17,000 |
Inquiry - HU63A/63A-5X