CW 30
CW 30 Aristech Malaysia, Johor, Johor Bahru (JB), Selangor, Penang Supply Supplier Suppliers | IPM TECHNOLOGY SDN BHD

 

ITEM CW-10 CW-30 CW-40 CW-50 CW-70
Machining method Submerged or Flushing
Max.workpiece size 680x420x150 780x500x250 880x500x250 1,000x690x300 1,200x790x300
(WxDxH)(mm)
Max. workpiece  250kg 500kg 550kg 800kg 1,000kg
weight
X,Y axes travel 300x200(mm) 400x300(mm) 500x300(mm) 600x400(mm) 800x500(mm)
Z axis travel 150(mm) 250(mm) 250(mm) 300(mm) 300(mm)
U,V axes travel 30x 50x50(mm)
50x50(mm)
60x60(mm) 60x60(mm)
30(mm)
X-Y axis feed rate Max. 900mm/min
Drive motor AC Servo Motor
(X, Y, U, V)
Wire diameter ø0.25mm(ø0.15 - 0.3)
(standard)
Wire tension 200-2500gf
Wire feeding speed 0-15m/min
Best surface  Ra0.65
roughness m
Max. taper angle 15°/80
Max.wire 6kg 6kg 6kg 10kg 10kg
bobbin weight
Work tank  (S)850x573x375 (S)970x719x510 (S)1070x719x480 (S)1136x900x530 1492x972x480
inner dimensios (F)920x573x400 (F)1040x719x450 (F)1140x719x450 (F)1272x862x480
(WxDxH)(mm)        
Machine weight 1500kg 2200kg 2400kg 2800kg 4100kg
http://www.aristech.com.tw/en/images/icon01.gif
Filter tank capacity(liter)
480/420 690/420 830/420 1215/420 420
Filter element Paper filters
lon exchange resin 15
Conductivity control Standard
Fluid temperature control Auto
Outside dimension (WxHxD)(mm) (S)1100x1400x1290 (S)1100x1570x1290 (S)1150x1820x1360 (S)1200x1800x1470 950x1400x1290
(F)950x1400x1290 (F)950x1400x1290 (F)950x1400x1290 (F)950x1400x1290
Net weight 200kg 250kg 260kg 280kg 280kg
POWER SUPPLY UNIT  
Circuit system Power MOS transistor
Max. output current 25A
Voltage select 145Volt.
IP select 10 steps
Off time select 50 steps
CNC CONTROL UNIT  
I/O device Keyboard, RS-232C, CF CARD
Display type 15' LCD-TFT
Control system IPC, close loop software servo system
Control axis X, Y, Z, U, V, (5 axes)
Setting unit 0.001mm
Max. command value
9999.999mm
Interpolation Linear/Circular
Command system Abs./lnc.  
Machining feed control Servo/Const. Feed
scaling 0.001-999.999
Auto 2nd cut system Re-trace and auto changed machining data
Machining condition memory 0-255
Outside dimensions(WxDxH) 600x870x1850mm
http://www.aristech.com.tw/en/images/icon02.gif
Total AC power input
3ø220V 
10ге / 13 KVA
•Specification is subject to change without further notice.   http://www.aristech.com.tw/en/images/space.gif
 

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version