JN-NV1050 Chncit Malaysia, Johor Bahru (JB), Selangor, Penang, Kuala Lumpur (KL) Supply Supplier Suppliers | IPM TECHNOLOGY SDN BHD
  Model Unit JN-NV1050
Spindle Tool Shank - BT40 (BT50)
Speed rpm 6000
Transmission - Belt (Gear) Drive
Bearing lubrication - Grease
Cooling System - Oil cooled
Spindle motor max.rating Kw(HP) 15(20)
Axis motor max.rating (MITSUBISHI) Kw 2.0/3.5/3.5
Axis motor max.rating (FANUC) Kw 2.5/2.5/2.5(std.) / 3.0/3.0/4.0(opt.)
Table Working area Mm(inch) 1300*550(51.2*21.7)
Max.loading kg 700
T-slots (No.*Width*Pitch) Mm (inch) 5*18*125(5*0.8*5.0)
Travel X axis Mm (inch) 1050(41.3)
Y axis Mm (inch) 550(21.7)
Z axis Mm (inch) 600(23.6)
Spindle nose to table Mm (inch) 150-750(5.9-29.5)
Spindle centre to solid column surface Mm (inch) 566(22.3)
Feed Rates Rapids on X/Y/Z axis m/min 36/36/36
Max.Cutting Feedrate m/min 20/20/20
Tool Magazine Tool storage capacity pcs 24
Type of tool (optional) type BT40 (BT50opt.)
Max.tool diameter Mm(inch) 85(3.3)arm
Max.tool weight kg 7
Max.tool length Mm(inch) 300(11.8)arm
Avg.chan ging time (ARM) Tool to tool Sec 2.5
Air source required Kg/cm2 6 up
Accuracy Positioning (VDI3341) Mm (inch) 0.01(0.0004)
repeatability Mm (inch) 0.005(0.0002)
Dimension Machine weight kg 7200/8000
Power source required KVA 30
Shipping Floor Plan (L*W*H) water tank and chip conveyor not included Mm (inch) 2900*2500*2900(114.2*98.4*114.2)
Floor plan (L*W*H) Mm (inch) 3670*2520*2870(144.5*99.2*112.9)

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version