Share:


VERTICAL TURNING MOMENTUM MVL-16/16M

About MOMENTUM MVL-16/16M
 
  ITEM UNIT MVL-16 MVL-16M
CAPACITY Max. Swing Diameter mm (Inch) Ø2,000 (78.74) Ø2,000 (78.74)
Max. Turning Diameter mm (Inch) Ø2,000 (78.74) Ø2,000 (78.74)
Distance From Bite Holder End To Table Surface mm (Inch) 0 ̴ 1,605 (0 ̴ 63.18) 0 ̴ 1,555 (0 ̴ 61.22)
Max. Turning Height mm (Inch) 1,600 (62.99) 1,550 (61.02)
Max. Workplace Weight kg 10,000 10,000
TABLE Table Diameter (Manual Chuck) mm (Inch) Ø 1,600 (62.99) Ø 1,600 (62.99)
Range Of Table Speed (Low) rpm 22  ̴ 85 22  ̴ 85
Range Of Table Speed (High) rpm 65 ̴ 255 65 ̴ 255
Gear Speed steps 2 2
Max. Of Table Torque N.m 24,000 24,000
ATC ATC (Automatic Tool Changer) set 1 1
Number Of Tool Stations Random 12 12
Tool Type   T – Puller BT-50
Tool Size mm (Inch) 25 / 32 / 40 (1” / 1.25” /1.5”) 25 / 32 / 40 (1” / 1.25” /1.5”)
Cross Section Of Ram mm (Inch) 240 x 240 (9.44 x 9.44) 240 x 240 (9.44 x 9.44)
TRAVEL Horizontal Travel (X-Axis) mm (Inch) -1,020+1,220(-40.15+48.03),ref point -1,020+1,220(-40.15+48.03),ref point
Vertical Travel (Z-Axis) mm (Inch) 1,000 (39.37) 1,000 (39.37)
Cross Rail Travel mm (Inch) 750 (29.52), 3step (4 positions) 750 (29.52), 3step (4 positions)
FEED RATES Rapid Rate (X-Axis) m/min 10 10
Rapid Rate (Z-Axis) m/min 10 10
Cutting Feed Rate mm/rev ‘0.001 ~ 500 ‘0.001 ~ 500
Feed Overide % 0 ̴ 150 0 ̴ 150
MOTOR Table Main Motor kW (HP) ᾳ50i, 45 /55 (60.3/73.7) ᾳ50i, 45 /55 (60.3/73.7)
Feed Servo Motor (X Axis) kW (HP) ᾳ30i 7 (9.4) ᾳ30i 7 (9.4)
Feed Servo Motor (Z Axis) kW (HP) ᾳ30Bi 7 (9.4) ᾳ30Bi 7 (9.4)
Milling Spindle Motor kW (HP) - ᾳP40i (18.5/22kw)
Cf Axis Motor kW (HP) - ᾳ30i,7kw(9.4HP)
GENERAL Machine Height mm 6,325 6,250
Floor Space (L x W) mm 8,000 x 5,430 6,470 x 5,430
Machine Weight kgs 33,750 36,800
   
•Specification is subject to change without further notice.  
 


 Inquiry - VERTICAL TURNING MOMENTUM MVL-16/16M