VT-18
VT-18 First Malaysia, Johor, Johor Bahru (JB), Selangor, Penang Supply Supplier Suppliers | IPM TECHNOLOGY SDN BHD
SPECIFICATION
 
MODEL VT18
Travel
X-Axis 450 mm(17.71')
Y-Axis 300 mm(13.77')
Z-Axis 14T: 360 mm (14.17') 20T: 385 mm (15.15') / 
485 mm (9.29') (option)
Spindle nose to table 180 mm (7.08')
Table
Table size 500 mm x 350 mm (19.68~13.77')
Floor to table 850 mm (33.46')
Max. table loading capacity 150kgs (330 Lbs)
T-slot (number x width x pitch) 3 x 18 mm x 100 mm(3x0.7' x 3.93')
Spindle center to column 417 mm (16.41')
Feed system
Rapid traverse speed X/Y/Z: 48 / 48 / 36 M/min
Feed motor (FANUC) (FANUC) X/Y : β4i-4000X / Z: β8i-3000X
Ball screw diameter & pitch X: 25mm / 12mm (0.98/0.47') Y: 25mm / 12mm (0.98/0.47')
Z: 30mm / 12mm (1.18/0.47')
Cutting feed rate 12 mm/min('/min)
Type of transmission Direct mounting
Spindle
Type of tool shank BT 30 / DIN 30 BT 30 / DIN 30
Max. spindle speed FANUC: 10000 / 15000 rpm (Option: CTS)
Spindle motor FANUC: β3-10000i / œ T2-15000i rpm
Type of transmission Direct  Drive
ATC
Tool storage capacity 14 T 20 T (Option)
ATC type Turret Type Arm Type
Max. tool diameter 90 mm (3.54') 69 mm (2.72')
Without adjacent tool 150 mm (5.9') 135 mm (5.31')
Max. tool length 200 mm (7.87') 200 mm (7.87')
Max. tool weight 3 kg (6.61 Lbs) 3 kg (6.62 Lbs)
Tool changing time (Tool to Tool) 1.8 sec 0.7 sec
Tool changing time (Chip to Chip) 2.8 sec 2 sec
Method of tool selection By address code Random selection
bi-directional magazine rotation
Tool display None
Special tool management Yes (except FANUC 0l-Mate D)
Coolant system
Coolant tank size 200 L
Coolant capacity 150 L / min
Chip Flush capacity 150 L / min
Machine size
Machine height 2145 mm (84.4')
Floor space 1500 x 2159 mm (59' x 85')
Weight 2600 kgs (5320 Lbs)
Power source
Electrical power supply 10 KVA / 3 PH , 220V 50/60HZ
Compressed air supply 6.0 kgf/cm² (85psi (0.6MPa)
Controller
  FANUC
 
Edition / A01
* Specifications may different according to option accessories and are subject to change without notice.
 

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version