MCV1000 First Malaysia, Johor Bahru (JB), Selangor, Penang, Kuala Lumpur (KL) Supply Supplier Suppliers | IPM TECHNOLOGY SDN BHD
X-Axis 1,020 mm (40.2')
Y-Axis 510 mm (20')
Z-Axis 510 mm (20')
Spindle nose to table 120 ~ 630 mm (4.7 ~ 24.8')
Table size 1150 X 500 mm (45.3X19.7')
Floor to table 800 mm(31.5')
Max. table loading capacity 1,000 kgs(2200Lbs)
T-slot (no x Width x Pitch) 5 X 18 mm X 100 mm (5 X 0.7' X 3.9')
Spindle center to column 510 mm (20')
Feed system
Rapid traverse speed  X/Y: 20 M/min ( 787.4'/min), Z:18 M/min (708.7'/min)
Feed motor(FANUC) X/Y: 2.5kW (20 Nm) , Z: 3.0kW (36 Nm)
servo motor: X/Y: Beta 22i / Z: Beta 40iB
Ball screw diameter & pitch X/Y/Z: 40 mm / 10mm(1.6'/0.4')
servo motor: X/Y: Beta 22i / Z: Beta 40iB
Cutting feedrate 1~10,000 mm/min(0.04 ~ 393.7'/min)
Type of transmission Direct Drive
Type of tool shank BT 40 / CAT 40 / DIN 69871A
Max. spindle speed 8,000 rpm / 10,000 (Op)
Spindle motor 11 /15 kW
Type of transmission Belt
Tool storage capacity (Arm-Less) 24 tools (Op)
ATC type Armless type
Max. tool diameter 95 mm(3.7')
Without adjacent tool 156 mm(6.1')
Max. tool length 300 mm(11.8')
Max. tool weight 7 kgs(15Lbs)
Tool changing time (Tool to Tool) 3.2 sec
Tool changing time (Chip to Chip) 5.5 sec
Method of tool selection random selection
bi-directional magazine rotation
Tool display Yes
Special tool management Yes
Coolant system
Coolant tank size 450 L
Coolant capacity 95 L / min
Chip Flush capacity 105 L / min
Machine size
Machine height 2,575 mm (101.3')
Floor space 4,085mm(160.8')(W) X 2293 mm(90.2')(D)
weight 5,000 kgs (11000Lbs)
Power source
Electrical power supply 20 KVA / 3PH220V 50/60HZ
Compressed air supply 6.0 kgf/cO (85psi) (0.6MPa)
Edition / A01
* Specifications may different according to option accessories and are subject to change without notice.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version