MCV300
MCV300 First Malaysia, Johor, Johor Bahru (JB), Selangor, Penang Supply Supplier Suppliers | IPM TECHNOLOGY SDN BHD
SPECIFICATION
 
MODEL MCV300
Travel
X-Axis 610 mm(24')
Y-Axis 305 mm(12') / 355 mm(14') OP
Z-Axis 460 mm(18.1')
Spindle nose to table 70 - 530 mm(2.8-20.9')
Table
Table size 700 mm x 308 mm(27.6-12.1') / 700 x 350 mm (27.6-13.78') OP
Floor to table 835 mm(32.9')
Max. table loading capacity 350 kgs(770Lbs)
T-slot (no x Width x Pitch) 4/5(OP) x 16mm x 63.5 mm ( 4/5(OP) x 0.6 x 2.5' )
Spindle center to column 415 mm(16.3')
Feed system
Rapid traverse speed  X/Y: 20 M/min ( 787.4'/min) , Z:18 M/min (708.7'/min)
Feed motor(FANUC) X/Y: 1.2kW (8Nm) , Z: 1.8kW (12Nm)
Ball screw diameter & pitch 32 mm / 10mm (1.3' / 0.4')
Cutting feedrate 1-10,000 mm/min (0.04 - 393.7')
Type of transmission Direct Drive
Spindle
Type of tool shank BT 40 / CAT 40 / DIN 69871A
Max. spindle speed 8,000 rpm / 10,000 rpm (Op)
Spindle motor 5.5 / 7.5 kW / 7.5 / 11 kW (Op)
Type of transmission Belt
ATC
Tool storage capacity (Arm-Less) 10 tools 16 tools (Op) 24 tools (Op)
ATC type Armless type Armless type
Max. tool diameter 120 mm (4.7') 93 mm (3.7') 76 mm (3')
Without adjacent tool 150 mm (5.9') 120 mm (4.7')
Max. tool length 300 mm (11.8') 230 mm (9.1')
Max. tool weight 7 kg (15Lbs) 7 Kg (15Lbs)
Tool changing time (Tool to Tool) 2 sec 3.2 sec
Tool changing time (Chip to Chip) 8.1 sec 5.5 sec
Method of tool selection By address code random selection
bi-directional magazine rotation
Tool display None
Special tool management Yes (except FANUC 0l-Mate D)
Coolant system
Coolant tank size 160 L
Coolant capacity 150 L / min
Chip Flush capacity Standard
Machine size
Machine height 2,400 mm (94.5')
Floor space 1,850 mm (72.8')(W) x 1,825 mm (71.9')(D)
weight 2,500 kgs (5500Lbs)
Power source
Electrical power supply 15 KVA/3PH, 220V 50/60HZ
Compressed air supply 6.0 kgf/cO (85psi) (0.6MPa)
Weight 2500 kgs (5500 Lbs)
Controller
  FANUC / HEIDENHAIN / SIEMENS
 
Edition / A05
* Specifications may different according to option accessories and are subject to change without notice.
 

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version