FH550R
Horizontal Machining Center
●Twin ball screw is adopted for driving all axes (X, Y, and Z) to realize the feed rate of 48 m/min and acceleration of 0.5 G, which is the highest in this class.
●Center trough eliminates troubles caused by cutting chips.
●In addition, HW55A is equipped with an access door that opens wide up to the ceiling and swing type operation board that enables a user to face parallel to the work piece in the machine for improved workability at presetting.
OP=Option
FH550R
●Box guide ways realize long term high-precision and high rigidity. Heat treated box guide ways are installed on the surface which has high straightness and perpendicularity by scraping. ●Twin ball screw is adopted for driving all axes (X, Y, and Z) to realize the feed rate of 48 m/min and acceleration of 0.5 G, which is the highest in this class.
●Center trough eliminates troubles caused by cutting chips.
●In addition, HW55A is equipped with an access door that opens wide up to the ceiling and swing type operation board that enables a user to face parallel to the work piece in the machine for improved workability at presetting.
Specification
| Item | Unit | FH550R | |
| Stroke | X-axis | mm | 750 |
| Y-axis | mm | 800 | |
| Z-axis | mm | 850 | |
| Table | Palette size | mm | 550×550 |
| Maximum loading weight | kg | 800 | |
| Spindle | Taper | ISO 7/24 Taper No.50 | |
| Spindle rotation speed | min-1 | 50 ～ 6,000 (OP：15,000) | |
| Feed rate | Rapid feed rate | m/min | 48 |
| Cutting feed rate(max.) | m/min | 20 | |
| APC | 2APC Front side turn type | ||
| ATC | Number of tools to be strored | pcs | 40 |
| Machine weight | Kg | About 18,000 | |
