About CHNCIT JN-NV1050
Model | Unit | JN-NV1050 | ||||
Spindle | Tool Shank | - | BT40 (BT50) | |||
Speed | rpm | 6,000 | ||||
Transmission | - | Belt (Gear) Drive | ||||
Bearing lubrication | - | Grease | ||||
Cooling System | - | Oil cooled | ||||
Spindle motor max.rating | kw(HP) | 15(20) | ||||
Axis motor max.rating (MITSUBISHI) | kw | 2.0/3.5/3.5 | ||||
Axis motor max.rating (FANUC) | kw | 2.5/2.5/2.5 (std.) / 3.0/3.0/4.0 (opt.) | ||||
Table | Working area | mm(inch) | 1300*550 (51.2*21.7) | |||
Max.loading | kg | 700 | ||||
T-slots (No.*Width*Pitch) | mm (inch) | 5*18*125 (5*0.8*5.0) | ||||
Travel | X axis | mm (inch) | 1,050 (41.3) | |||
Y axis | mm (inch) | 550 (21.7) | ||||
Z axis | mm (inch) | 600 (23.6) | ||||
Spindle nose to table | mm (inch) | 150-750 (5.9-29.5) | ||||
Spindle centre to solid column surface | mm (inch) | 566 (22.3) | ||||
Feed Rates | Rapids on X/Y/Z axis | m/min | 36/36/36 | |||
Max.Cutting Feedrate | m/min | 20/20/20 | ||||
Tool Magazine | Tool storage capacity | pcs | 24 | |||
Type of tool (optional) | type | BT40 (BT50opt.) | ||||
Max.tool diameter | mm(inch) | 85(3.3)arm | ||||
Max.tool weight | kg | 7 | ||||
Max.tool length | mm(inch) | 300(11.8)arm | ||||
Avg.chan ging time (ARM) | Tool to tool | Sec | 2.5 | |||
Air source required | kg/cm2 | 6 up | ||||
Accuracy | Positioning (VDI3341) | mm (inch) | 0.01(0.0004) | |||
repeatability | mm (inch) | 0.005(0.0002) | ||||
Dimension | Machine weight | kg | 7,200/8,000 | |||
Power source required | KVA | 30 | ||||
Shipping Floor Plan (L*W*H) water tank and chip conveyor not included | mm (inch) | 2,900*2,500*2,900(114.2*98.4*114.2) | ||||
Floor plan (L*W*H) | mm (inch) | 3,670*2,520*2,870(144.5*99.2*112.9) |
•Specification is subject to change without further notice. |
Standard Acessories | ||
Fanuc Controller | ||
Spindle speed 8000/1000/12000/20000 rpm (depend on machine model) | ||
Automatic tool changer | ||
Full splash guard | ||
Heat exchanger for lectric cabinet | ||
Automatic lubricating system | ||
Spindle air blast system | ||
Spindle oil cooler | ||
Spindle air curtain | ||
Spindle orientation | ||
Coolant gun & air socket | ||
LED light | ||
Rigid tapping | ||
Coolant system & tank | ||
Cycle finish indicator & alarm lights |
Inquiry - CNC VERTICAL MACHINING CENTER CHNCIT JN-NV1050