About MOMENTUM MVL-25/25M
ITEM | UNIT | MVL-25 | MVL-25M | |
CAPACITY | Max. Swing Diameter | mm (Inch) | Ø3,000(118.11) | |
Max. Turning Diameter | mm (Inch) | Ø3,000(118.11) | ||
Distance From Bite Holder End To Table Surface | mm (Inch) | 0 ̴ 2,230 (0 ̴ 87.79) | 0 ̴ 2,180 (0 ̴ 85.82) | |
Max. Turning Height | mm (Inch) | 2,180 (85.82) | 2,130 (83.85) | |
Max. Workplace Weight | kg | 20,000 | ||
TABLE | Table Diameter (Manual Chuck) | mm (Inch) | Ø 2,500 (98.42) | |
Range Of Table Speed (Low) | rpm | 8 ̴ 30 | ||
Range Of Table Speed (High) | rpm | 31 ̴ 120 | ||
Gear Speed | steps | 2 | ||
Max. Of Table Torque | N.m | 89,400 | ||
ATC | ATC (Automatic Tool Changer) | set | 1 | |
Number Of Tool Stations | Random | 12 | ||
Tool Type | T-Puller | BT-50 | ||
Tool Size | mm (Inch) | 25 / 32 / 40 (1” / 1.25” /1.5”) | ||
Cross Section Of Ram | mm (Inch) | 300 x 300 (11.81 x 11.81) | ||
TRAVEL | Horizontal Travel (X-Axis) | mm (Inch) | -1,520+1,720(-59.84+67.71),ref point | |
Vertical Travel (Z-Axis) | mm (Inch) | 1,200 (47.24) | ||
Cross Rail Travel | mm (Inch) | 1,400 (55.10), 5 step (6 positions) | ||
FEED RATES | Rapid Rate (X-Axis) | m/min | 10 | |
Rapid Rate (Z-Axis) | m/min | 10 | ||
Cutting Feed Rate | mm/rev | 0.001 ~ 500 | ||
Feed Overide | % | 0 ̴ 150 | ||
MOTOR | Table Main Motor | kW (HP) | ᾳ60HVi, 60 /75 (80.4/100.5) | |
Feed Servo Motor (X Axis) | kW (HP) | ᾳ30i 7 (9.4) | ||
Feed Servo Motor (Z Axis) | kW (HP) | ᾳ30Bi 7 (9.4) | ||
Milling Spindle Motor | kW (HP) | - | ᾳP50i (22/30kw) | |
Cf Axis Motor | kW (HP) | - | ᾳ30i 7kw (9.4HP) | |
GENERAL | Machine Height | mm | 7750 (305.11) | |
Floor Space (L x W) | mm | 8,810 x 6,000 | ||
Machine Weight | kgs | 55,000 | ||
•Specification is subject to change without further notice. |
Inquiry - VERTICAL TURNING MOMENTUM MVL-25/25M