VMC - 1910
VMC - 1910 VMC Series Agma Malaysia, Johor Bahru (JB), Selangor, Penang, Kuala Lumpur (KL) Supply Supplier Suppliers | IPM TECHNOLOGY SDN BHD

Model VMC-1910P/G VMC-2210P/G
Spindle Spindle Taper No. 50
Transmission Belt/Gear
Spindle Speed 8,000/6,000 r.p.m.
Table Table Size 2,100mm x 1,000mm
(82.68' x 39.37')Std.
2,100mm x 900mm
(82.68' x 35.43')Opt.
2,400mm x 1,000mm
(94.49' x 39.37')Std.
2,400mm x 900mm
(94.49' x 35.43')Opt.
T-Slot Size 18mm x 7 x 150mm (0.71' x 7 x 5.91')Std.
18mm x 6 x 150mm (0.71' x 6 x 5.91')Opt.
Work Area
1,900mm x 1,000mm
(74.80' x 39.37')Std.
1,900mm x 900mm
(74.80' x 35.43')Opt.
2,200mm x 1,000mm
(86.61' x 39.37')Std.
2,200mm x 900mm
(86.61' x 35.43')Opt.
Max. Table Load 3,000kgs (6,600 lbs) 4,000kgs (8,800 lbs)
Travel & Feedrate X Axis 1,900mm (74.80') 2,200mm (86.61')
Y Axis 1,000mm(39.37')Std./ 900mm (35.43')Opt.
Z Axis 800mm (31.50')
Distance from Spindle Nose to Table 150~950mm (5.91'~37.40')
Distance from Spindle Center to Column Ways 1,100mm(43.31')Std./980mm (38.58')Opt.
Rapid Traverse X, Y =12 M/Min (590 IPM)
Z=10 M/Min (393 IPM)
Cutting Feedrate X, Y, Z: 1~10,000mm/min (393 IPM)
ATC Tool Shank BT/CAT-50
Pull Stud MAS P50T-1(45º)
Magazine Capacity 32 Tools
Max. Tool Diameter
(with adjacent pocket empty)
Max. Tool Diameter (full storage) Ø125mm(4.92')
Max. Tool Length 300mm (11.81')
Max. Tool Weight 15kgs (33 lbs)
ATC Type Cam Driven Arm Type
Motor Spindle(Cont./30min.) 18.5/22Kw (25/30 HP) Belt
15/18.5Kw (20/25 HP) Gear
X/Y/Z Axes(Fanuc) 7Kw (9.33 HP)
Lubrication Pump 0.025Kw (0.033 HP)
Coolant Pump 0.49Kw (0.66 HP)
Misc. Machine Height 3,600mm (142')
Floor Space 5,100mm x 3,900mm
(201' x 154')
5,700mm x 3,900mm
(225' x 154')
Machine Weight 18,000kgs (39,600 lbs) 20,000kgs (44,000 lbs)
Control Fanuc 0iMD
•Specification is subject to change without further notice.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version