MV-800D
MV-800D
| MODEL | UNIT | MV-800D | |
| Table | Size | mm | 900 x 500 |
| T Slot (width x no x distance) | mm x T | 18 x 5 x 90 | |
| Maximum Table Load | kgs | 500 | |
| Travel | X, Y, Z Axis | mm | 810 x 520 x 500 |
| Table Top Surface To Spindle Nose | mm | 100-600 | |
| Distance Between Spindle Center & Column Surface | mm | 580 | |
| Roller Type Linear Guideway (X / Y / Z Axis) | mm | 35 / 35 / 35 | |
| Ball Screw (X / Y / Z Axis) | mm | 40 x 40 x 40 | |
| Spindle | Spindle Holder | Direct | |
| Taper | ISO | BT40 | |
| Diameter | mm | 70 | |
| Spindle Speed | rpm | 12,000 Direct Spindle | |
| Feed | Cutting Feed Rate X Y Z | m/min | 20 / 20 / 20 |
| Rapid Feed Rate X Y Z | m/min | 36 / 36 / 36 | |
| ATC | Type | ARM | |
| Max. Tool Dia | mm | 75 / 150 | |
| Max. Tool Length | mm | 300 | |
| Max. Tool Weight | kgs | 7 | |
| Tool Type | BT40 | ||
| Tool Magazine Capacity | pcs | 24 (t-T) 2.5 Sec (Inverter) | |
| Motors | Spindle (Cont./30 min) | kW | 7.5 / 11 ; 11 / 15 (Option) 15 / 18.5 (Option) |
| X / Y / Z Axis | kW | 3.1 / 3.0 / 4.0 (Fanuc) ; 3.5 / 3.5 / 4.5 (Mitsubishi) | |
| Coolant Pump | kW | 0.75 | |
| ATC Motor | w | 350 | |
| Air Conditioner | w | 500 | |
| Spindle Oil Cooler | w | 600 | |
| Chip Flush Motor | w | 2,580 | |
|
Other |
Machine Space (L x W) | mm | 2,200 x 2,250 |
| Coolant Tank Capacity | L | 250 | |
| Net Weight | kgs | 5,500 |
