JHI-150NC
| MODEL | UNIT | JHI-150NC | |
| Capacity | Range Of I.D Grinding | mm | Ø6 ̴ Ø150 |
| Max. Grinding Depth | mm | 150 | |
| Max. Holding Length | mm | 200 | |
| Swing Over Bed | mm | 500 | |
| Swing In Chuck Guard | mm | 280 | |
| Wheel Feeding (X Axis) | Rapid Feed Speed | m/min | 5 |
| Max. Stroke | mm | 100 | |
| Min. Setting Unit | mm | 0.001 | |
| Wheel Feeding (Z Axis) | Rapid Feed Speed | m/min | 8 |
| Max. Stroke | mm | 450 | |
| Min. Setting Unit | mm | 0.001 | |
| Work Head | Spindle Speed | rpm | 10 – 1,000 |
| Spindle | A2 - 5 | ||
| Swivel Angle | 9 | ||
| Table Micro Feed | mm | ±8° | |
| Motor | G/W Pindle Motor | HP | 3 |
| Spindle Head Motor | KW | Servo 1.5 | |
| Z Axis Servo Motor | KW | 1.5 | |
| X Axis Servo Motor | KW | 0.75 | |
| Coolant | HP | 1/4 | |
| Hydraulic Lubrocation | HP | 1/4 | |
| Hydraulic System | HP | 1 | |
| General | Machine Height | mm | 2,100 |
| Floor Space | mm | 2,900 x 1,900 | |
| Machine Weight | kgs | 2,500 | |
| •Specification is subject to change without further notice. | |||
