MVL-16/16M
| MODEL | UNIT | MVL-16 | |
| Capacity | Max. Swing Diameter | mm (Inch) | Ø2,000 (78.74) |
| Max. Turning Diameter | mm (Inch) | Ø2,000 (78.74) | |
| Distance From Bite Holder End To Table Surface | mm (Inch) | 0 ̴ 1,605 (0 ̴ 63.18) | |
| Max. Turning Height | mm (Inch) | 1,600 (62.99) | |
| Max. Workplace Weight | kg | 10,000 | |
| Table | Table Diameter (Manual Chuck) | mm (Inch) | Ø 1,600 (62.99) |
| Range Of Table Speed (Low) | rpm | 22 ̴ 85 | |
| Range Of Table Speed (High) | rpm | 65 ̴ 255 | |
| Gear Speed | steps | 2 | |
| Max. Of Table Torque | N.m | 24,000 | |
| ATC | ATC (Automatic Tool Changer) | set | 1 |
| Number Of Tool Stations | Random | 12 | |
| Tool Type | T – Puller | ||
| Tool Size | mm (Inch) | 25 / 32 / 40 (1” / 1.25” /1.5”) | |
| Cross Section Of Ram | mm (Inch) | 240 x 240 (9.44 x 9.44) | |
| Travel | Horizontal Travel (X-Axis) | mm (Inch) | -1,020+1,220(-40.15+48.03),ref point |
| Vertical Travel (Z-Axis) | mm (Inch) | 1,000 (39.37) | |
| Cross Rail Travel | mm (Inch) | 750 (29.52), 3step (4 positions) | |
| Feed Rates | Rapid Rate (X-Axis) | m/min | 10 |
| Rapid Rate (Z-Axis) | m/min | 10 | |
| Cutting Feed Rate | mm/rev | ‘0.001 ~ 500 | |
| Feed Overide | % | 0 ̴ 150 | |
| Motor | Table Main Motor | kW (HP) | ᾳ50i, 45 /55 (60.3/73.7) |
| Feed Servo Motor (X Axis) | kW (HP) | ᾳ30i 7 (9.4) | |
| Feed Servo Motor (Z Axis) | kW (HP) | ᾳ30Bi 7 (9.4) | |
| Milling Spindle Motor | kW (HP) | - | |
| Cf Axis Motor | kW (HP) | - | |
| General | Machine Height | mm | 6,325 |
| Floor Space (L x W) | mm | 8,000 x 5,430 | |
| Machine Weight | kgs | 33,750 | |
| •Specification is subject to change without further notice. | |||
