Share:


VERTICAL TURNING MOMENTUM MVL-25/25M


About MOMENTUM MVL-25/25M
 
  ITEM UNIT MVL-25 MVL-25M
CAPACITY Max. Swing Diameter mm (Inch) Ø3,000(118.11)
Max. Turning Diameter mm (Inch) Ø3,000(118.11)
Distance From Bite Holder End To Table Surface mm (Inch) 0 ̴ 2,230 (0 ̴ 87.79) 0 ̴ 2,180 (0 ̴ 85.82)
Max. Turning Height mm (Inch) 2,180 (85.82) 2,130 (83.85)
Max. Workplace Weight kg 20,000
TABLE Table Diameter (Manual Chuck) mm (Inch) Ø 2,500 (98.42)
Range Of Table Speed (Low) rpm 8  ̴ 30
Range Of Table Speed (High) rpm 31 ̴ 120
Gear Speed steps 2
Max. Of Table Torque N.m 89,400
ATC ATC (Automatic Tool Changer) set 1
Number Of Tool Stations Random 12
Tool Type   T-Puller BT-50
Tool Size mm (Inch) 25 / 32 / 40 (1” / 1.25” /1.5”)
Cross Section Of Ram mm (Inch) 300 x 300 (11.81 x 11.81)
TRAVEL Horizontal Travel (X-Axis) mm (Inch) -1,520+1,720(-59.84+67.71),ref point
Vertical Travel (Z-Axis) mm (Inch) 1,200 (47.24)
Cross Rail Travel mm (Inch) 1,400 (55.10), 5 step (6 positions)
FEED RATES Rapid Rate (X-Axis) m/min 10
Rapid Rate (Z-Axis) m/min 10
Cutting Feed Rate mm/rev 0.001 ~ 500
Feed Overide % 0 ̴ 150
MOTOR Table Main Motor kW (HP) ᾳ60HVi, 60 /75 (80.4/100.5)
Feed Servo Motor (X Axis) kW (HP) ᾳ30i 7 (9.4)
Feed Servo Motor (Z Axis) kW (HP) ᾳ30Bi 7 (9.4)
Milling Spindle Motor kW (HP) - ᾳP50i (22/30kw)
Cf Axis Motor kW (HP) - ᾳ30i 7kw (9.4HP)
GENERAL Machine Height mm 7750 (305.11)
Floor Space (L x W) mm 8,810 x 6,000
Machine Weight kgs 55,000
   
•Specification is subject to change without further notice.  
 


 Inquiry - VERTICAL TURNING MOMENTUM MVL-25/25M