LS SERIES
LS SERIES StarVision Malaysia, Johor Bahru (JB), Selangor, Penang, Kuala Lumpur (KL) Supply Supplier Suppliers | IPM TECHNOLOGY SDN BHD
Model Unit LS-4230/35 LS-5230/35 LS-6230/35 LS-8230/35 LS-10230/35
Travel    
X axis mm 4,200 5,200 6,200 8,200 10,200
Y axis mm 3,000/3,500
Z axis mm 1,000 (1,200 - opt.)
Spindle nose to table distance mm 150-1,150 (150-1,350 - opt.)
Distance between columns (max. workpiece width) mm 3,200 (3,150)/3,700 (3,650)
Work table    
Length mm 4,000 5,000 6,000 8,000 10,000
Width mm 2,800 (3,500 - opt.)
T slot (width x number x pitch) - 28x13x200 (28x17x200 - opt.)
Max. table load kg 20,000 24,000 28,000 32,000 40,000
Spindle    
Spindle motor kW 22/26
Spindle speed (gear type) rpm 4,500 (6,000 - opt.)
Spindle taper - BT 50 / ISO 50 / CAT 50
Feed    
Rapid feed-rate (X/Y/Z) m/min 10/10/12 8/10/12
Cutting feed-rate mm/min 7,000
Accuracy    
Position accuracy mm ±0.005/300; ±0.015/ full travel
P0.045
Repeatability mm ±0.003
Ps0.03
ATC    
Tool magazine capacity pcs 32 (40/60/90 - opt.)
Max. tool length mm 350
Max. tool weight kg 20
Max. tool size (full tools) mm Ø125
Max. tool size (next pocket empty) mm Ø245
Others    
Power consumption kVA 65
Compressed air kg/cm2 6.5
Machine weight (approx.) tons 55/57 63/65 71/73 87/89 101/103
Floor space (LxWxH) (approx.) m 13.8x7.3(7.8)x5.4 15.8x7.3(7.8)x5.4 17.3x7.3(7.8)x5.4 21.7x7.3(7.8)x5.4 26.1x7.3(7.8)x5.4
 
Model Unit LS-4240/45 LS-5240/45 LS-6240/45 LS-8240/45 LS-10240/45
Travel    
X axis mm 4,200 5,200 6,200 8,200 10,200
Y axis mm 4,000/4,500
Z axis mm 1,000 (1,200/1,500 - opt.)
Spindle nose to table distance mm 150~1,150 (150~1,350/150~1,650 - opt.)
Distance between columns (max. workpiece width) mm 4,200 (4,150)/4,700 (4,650)
Work table    
Length mm 4,000 5,000 6,000 8,000 10,000
Width mm 2,800 (3,500 - opt.)
T slot (width x number x pitch) - 28x13x200 (28x17x200 - opt.)
Max. table load kg 20,000 24,000 28,000 32,000 40,000
Spindle    
Spindle motor kW 22/26
Spindle speed (gear type) rpm 4,200
Spindle taper - BT 50 / ISO 50 / CAT 50
Feed    
Rapid feed-rate (X/Y/Z) m/min 10/10/12 8/10/12
Cutting feed-rate mm/min 7,000 6,000
Accuracy    
Position accuracy mm ±0.005/300; ±0.015/ full travel
P0.045
Repeatability mm ±0.003
Ps0.03
ATC    
Tool magazine capacity pcs 32 (40/60/90 - opt.)
Max. tool length mm 350
Max. tool weight kg 20
Max. tool size (full tools) mm Ø125
Max. tool size (next pocket empty) mm Ø245
Others    
Power consumption kVA 65
Compressed air kg/cm2 6.5
Machine weight (approx.) tons 66/69 74/77 82/85 98/101 112/115
Floor space (LxWxH) (approx.) m 13.8x8.3(8.8)x5.4 15.8x8.3(8.8)x5.4 17.3x8.3(8.8)x5.4 21.7x8.3(8.8)x5.4 26.1x8.3(8.8)x5.4

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version