VMC 137
VMC 137 Agma Malaysia, Johor, Johor Bahru (JB), Selangor, Penang Supply Supplier Suppliers | IPM TECHNOLOGY SDN BHD
  Model VMC-137 VMC-158
Spindle Spindle Taper No. 50
Transmission Belt/Gear
Spindle Speed
8,000/6,000 r.p.m.
Table Table Size
1,400mm x 710mm
(55.12" x 27.95")
1,700mm x 815mm
(66.93" x 32.09")
T-Slot Size
18mm x 6 x125mm
(0.71" x 6 x 4.92")
18mm x 5 x150mm
(0.71" x 5 x 5.91")
Work Area
1,300mm x 700mm
(51.18" x 25.56")
1,500mm x 800mm
(59.06" x 31.50")
Max. Table Load 1,600kgs (3,520lbs) 2,000kgs (4,400lbs)
Travel & Feedrate X Axis 1,300mm (51.18") 1,500mm (59.06")
Y Axis 700mm (27.56") 800mm (31.50")
Z Axis 650mm (25.59") 700mm (27.56")
Distance from Spindle Nose to Table 200~850mm
Distance from Spindle Center to Column Ways 755mm (29.72") 855mm (33.66")
Rapid Traverse X, Y =15 M/Min (590IPM)
Z=12 M/ Min (472IPM)
Cutting Feedrate X, Y, Z: 1~10,000mm / min (393 IPM)
ATC Tool Shank BT/CAT-50
Pull Stud MAS P50T-1(45º)
Magazine Capacity 24 Tools
Max. Tool Diameter
(with adjacent pocket empty)
Max. Tool Diameter
(full storage)
Max. Tool Length 300mm (11.81")
Max. Tool Weight 15kgs (33lbs)
ATC Type CAM Driven Arm Type
Motor Spindle(Cont./30min.) 18.5/22Kw (25/30 HP) Belt
15/18.5Kw (20/25 HP) Gear
X/Y/Z Axes(Fanuc) 4.0Kw (5.45 HP)
Lubrication Pump 0.025Kw (0.033 HP)
Coolant Pump 0.49Kw (0.66 HP)
Misc. Machine Height 3,130mm (124") 3,320mm (131")
Floor Space 4,110mm x 3,530mm
(162" x 139")
4,540mm x 3,800mm
(179" x 150")
Machine Weight
12,000kgs (26,400 lbs)
15,000kgs (33,000 lbs)
Control Fanuc 0iMD
•Specification is subject to change without further notice.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version